Designboom reporter Matthew Burgos spotlights how MIT engineers “3D printed recycled glass and produced robust LEGO-like bricks for buildings and facades.” The researchers found that “in mechanical testing, a single 3D printed recycled glass brick can withstand pressures similar to those of a concrete block,” Burgos explains. “This means that the material can be just as robust as concrete, making it ideal for construction.”
Researchers at MIT have developed “3D-printed glass blocks shaped like a figure eight that snap together like LEGOs,” reports Brian Heater for TechCrunch. “The team points to glass’ optical properties and its ‘infinite recyclability’ as reasons for turning to the material,” writes Heater.
With skateboarding the sixth fastest-growing sport in the U.S. from 2019 to 2023, Bloomberg reporter Alexandra Lange highlights how Alexis Sablone MA ’16, coach of the 2024 Olympic Women’s U.S. Skateboarding Team, a three-time X-Games gold medalist, and graduate of MIT’s Department of Architecture, recently “designed a set of sculptural skate elements for a former tennis court, formalizing and aestheticizing what had been an informal spot” at a park in Montclair, New Jersey.
Ivan Casadevantre MS '15 and Hasier Larrea MS '15 co-founded ORI Living – a furniture company that uses electromechanics to develop furniture systems designed for space efficiency. “You have to make those small spaces feel and act as if they were much larger,” says Larrea. “And that’s when we started thinking about robotics, thinking about engineering, and how we bring all those technologies to make it possible to live large in a smaller footprint.”
Researchers at MIT have created a noise-blocking sheet of silkworm silk that could “greatly streamline the pursuit of silence,” reports Andrew Chapman for Scientific American. “The silk sheet, which is enhanced with a special fiber, expands on a technology also found in noise-canceling headphones,” explains Chapman. “These devices create silence by sampling the ambient noise and then emitting sound waves that are out of phase with those in the environment. When the ambient and emitted waves overlap, they cancel each other out.”
Researchers at MIT have developed a fiber capable of suppressing sound that is made up of “silk, canvas and other common materials,” reports Charlie McKenna for MassLive. “The silk is barely thicker than human hair and is made by heating the materials and drawing them into a fiber,” explains McKenna. “Since each material flows at the same temperature, they can be pulled into a fiber while maintaining their structure.”
MIT researchers have developed a wearable backpack with spider-like limbs to help astronauts maintain stability in space, reports Jess Thomson for Newsweek. The new technology, called Supernumerary Robotic Limbs (SuperLimbs), “could be crucial in future missions to the moon, where gravity is only a sixth of that on Earth and astronauts may struggle to clamber up again after a fall due to their unwieldy space suits,” explains Thomson.
Researchers at MIT have developed SuperLimbs, a pair of wearable robotic limbs that “can physically support an astronaut and lift them back on their feet after a fall,” reports Brain Heater for TechCrunch. “The system, which is still in the prototype phase, responds directly to the wearer’s feedback,” writes Heater. “When sitting or lying down, it offers a constructive support to help them get back up while expending less energy — every extra bit helps in a situation like this.”
MIT researchers have developed “an ultra-thin silk fabric embedded with a special piezoelectric fiber that can vibrate to cancel out noise in a room,” reports Bob McDonald for CBC. “The researchers want to further study how changing elements of the fabric — such as the number of piezoelectric fibers and the voltage they apply to it, the direction they're sewn into the fabric, and the size of the pores in the fabric — can improve on their findings,” writes McDonald.
Interesting Engineering reporter Sujita Sinha spotlights how MIT researchers crafted a special silk fabric capable of blocking sound. “Inside this special material is a fiber that springs to life when an electrical charge is applied,” explains Sinha. “The fabric starts shaking when it hears sound, which helps stop noise in two different ways.”
Prof. Carlo Ratti and the WeBuildGroup have developed a proposal to help rebuild the Francis Scott Key Bridge in Baltimore, Maryland, reports Anna Cooban for CNN. Ratti explained that the blueprint was designed to “produce a safer bridge by widening the channels through which ships can pass, among other measures.” The design will help prevent “the risk of a tragedy such as the one of March 26 happening again,” Ratti explains.
David Zipper, a senior fellow at the MIT Mobility Lab, writes for Bloomberg about how the findings of William Whyte, an urbanist observer and writer, on what attracts people to urban spaces could be used to help draw people back to downtown areas after the Covid-19 pandemic. “Whyte’s insights suggest a need to build comfortable, pleasant places that invite people to linger, perhaps eating a meal or buying a new shirt while they’re there,” writes Zipper. “And his research serves as a reminder that good public spaces strengthen human relationships, offering an antidote to the loneliness epidemic said to afflict a growing number of Americans.”
New York Times reporter Stephen Wallis spotlights Prof. Carlo Ratti’s proposal for the world’s first “farmscraper” in Shenzhen, China, a 51-story building that would be wrapped in a vertical hydroponic farm and could produce enough food annually to feed 40,000 people. “At this critical moment, what we architects do matters more than ever,” Ratti emphasizes. “Every kilowatt-hour of solar power, every unit of zero-carbon housing and every calorie of sustainably sourced vegetables will be multiplied across history.”
Prof. Skylar Tibbits speaks with Tech Briefs reporter Andrew Corselli about his team’s work developing a new “additive manufacturing technique that can print rapidly with liquid metal, producing large-scale parts like table legs and chair frames in a matter of minutes.” Of his advice for engineers aiming to bring their ideas to fruition, Tibbits emphasizes: “Work hard, fail a lot, keep trying, don’t give up, and have amazing people around you. We're a research lab, so our whole goal is to go from impossible to possible. So, we're allowed to fail; we're not limited by profitability or customer demand or economy.”
Researchers from the MIT Self-Assembly Lab have developed a 4D-knit dress that uses “heat-activated yarn that allows its shape and fit to be altered in an instant,” reports Rima Sabina Aouf for Dezeen. Prof. Skylar Tibbits notes that by having “one dress that can be customized for fit and style, it can be perfectly tailored to the individual while being more sustainable and adaptable to changes in season, style or inventory.”